Stop reading packets.
Start asking questions.
AI-powered network packet analysis that detects anomalies and explains them in plain English. Decodes SIP, RTP, Diameter, GTP and other traffic and tells you what went wrong, without manual Wireshark filtering.
NAS: PDU Session Est. Request Path: UE → AMF → SMF Cause Code: 26 (Insufficient Resources) PFCP Session Est: incomplete RAT: NR TAI: 23401-0x1234
This capture shows a PDU Session Establishment failure. The UE sent a NAS PDU Session Request to the AMF, but the SMF returned Cause Code 26 (Insufficient Resources). The PFCP Session Establishment was never completed. RAN: NR, TAI 23401-0x1234.
A full-stack network intelligence platform
Five stages, one continuous pipeline; from raw traffic to a plain-English answer.
-
01
Capture
Live capture on any interface, or agent-based remote capture from distributed sites.
-
02
Decode
15+ protocol decoders: SIP, RTP, DNS, GTP, PFCP, NGAP, NAS-5GS, HTTP/2, Diameter.
-
03
Analyze
Flow analysis, call trace, MOS scoring and anomaly detection in one pass.
-
04
Alert
Real-time detection rules with notifications to Email, Slack or Webhook.
-
05
Explain
AI chat (Claude, OpenAI or Gemini) explains findings in plain English.
The cost of inaction
Every hour spent manually correlating packets is an hour your best engineer isn't spending on anything else.
Dropped calls
A single dropped-call investigation can tie up a senior engineer for an entire shift.
5G core failures
Failures across AMF, SMF and UPF are hard to correlate across protocols by hand.
VoIP quality
VoIP issues need RTP, SIP and Diameter analyzed simultaneously, not one tool at a time.
Security blind spots
Threats buried inside millions of packets go undetected until it's too late.
Everything a network engineer needs, in one tool
Nine capabilities. One platform. No stitching five tools together to get an answer.
PCAP upload & analysis
Drag and drop .pcap or .pcapng files. Decode, flow analysis and anomaly detection all run automatically, with results back in seconds.
Live capture
Capture on any local interface, or deploy lightweight agents that pull traffic from remote sites into the same console.
5G core support
AMF, SMF, UPF, NRF and AUSF decoded natively, so control-plane failures stay readable without a separate telecom probe.
VoIP & call trace
SIP ladder diagrams with RTP stream quality and MOS scores calculated per call, so an audio complaint arrives with a number attached.
AI chat
Ask "why did this call fail?" and get a protocol-level answer grounded in the actual capture, not a generic textbook explanation.
Detection rules
Built-in rules for floods, storms and protocol anomalies, plus custom rules with the severity level you assign to each one.
GeoIP & reputation
Every address is enriched with geographic location and threat intelligence, flagging traffic from high-risk sources automatically.
Observability
Prometheus metrics, bandwidth charts and top-talker breakdowns, so capacity trends stay visible alongside live incidents.
Multi-agent
Probe agents at remote sites stream back to one central console, giving a distributed network a single pane of glass.
Talk to your PCAP like a senior engineer
Protocol-aware deep dives: click a protocol, ask a question, get an answer grounded in the actual capture.
Ask the traffic a question. Get the root cause back.
An integrated NLP chatbot lets engineers talk to the capture the way a protocol specialist would: humans and agents analyzing network data together, then explaining it in language the rest of the team can act on.
- Click Events to explain every detected anomaly in one pass
- Ask RTP to auto-inject RTP context for jitter analysis
- Click PFCP to diagnose session setup failures
- Events → explain all detected anomalies
- RTP → auto-inject RTP context for jitter analysis
- PFCP → diagnose session setup failures
Supports Claude, OpenAI GPT-4 and Gemini. Switch in one click.
Native support for the entire 5G core interface stack
Built for telecom depth, not general-purpose packet inspection.
- NGAP
- N2 interface: UE registration and handover signalling
- NAS-5GS
- 5GMM and 5GSM per 3GPP TS 24.501
- GTP-C / GTP-U
- Tunnel management and inner packet inspection
- PFCP
- Session establishment with PDR, FAR, URR and QER information elements
- HTTP/2 SBI
- 16 network function API paths: AMF, SMF, NRF, AUSF and more
- Diameter
- LTE and IMS authentication and accounting
Real-time threat detection, built in
This isn't just forensic analysis after the fact, it watches your traffic as it happens.
Built-in detection rules
- TCP SYN flood and DDoS attacks
- DNS query storms and NXDOMAIN floods
- RTP anomalies: invalid SSRC, jitter spikes
- 5GC: NAS authentication failure storms
- PDU session floods and GTP-U tunnel floods
- SBI error rate threshold breaches
- Network function registration storms
Alerting & enrichment
- Email notifications
- Slack and Microsoft Teams
- Generic webhook
- Per-rule severity: critical, high, medium or info
- GeoIP enrichment: flags traffic from high-risk countries or known malicious IPs automatically
What it solves
The same incidents your team already handles, handled differently.
How we approach it
Send a real incident. Get a human-reviewed root cause. Deploy only if it proves useful.
Send us a PCAP
From a real incident; resolved or still open.
Our AI decodes and correlates it
Across SIP, RTP, Diameter, GTP, NGAP, PFCP and more; the same file your team already has.
You get a plain-English root cause report
Not a packet dump. An answer, with the supporting evidence shown.
Your engineers review and validate it
Every finding stays human-reviewed before anyone acts on it, this is a copilot, not an autopilot.
We talk about a working deployment
Only if the report actually proves useful to your team.
Proof
Currently deployed with a telecom customer analyzing live VoIP and 5G core traffic. Early results in production:
Free Root Cause Report, one PCAP
Send us a packet capture from an incident your team hasn't fully closed out. We'll run it through DeepPacketAI and send back the root cause our AI finds. No cost, no setup on your end, no obligation.
Reserve your free root cause report
Fill in your details below and we'll follow up within one business day to arrange secure transfer of your PCAP file.